Connecting To Other Devices; Playing An External Audio Devices, Such As A Smartphone, With The Built-In Speakers; Connecting Headphones Or; External Speakers - Yamaha PSR-E273 Owner's Manual

Connecting to Other Devices

Playing an External Audio
Devices, such as a Smartphone,
with the Built-in Speakers
1
Turn off the power for both the audio
device and this instrument.
2
Connect the audio device to the instru-
ment's [AUX IN] jack.
Use an audio cable with no resistance having a
stereo-mini plug on one side for connecting to
this instrument, and a proper plug to match the
output jack of the audio device on the other side.
Stereo-
mini plug
3
Turn on the audio device, then this
instrument.
4
Play back the connected audio device.
The sound of the audio device is output through
the speakers of this instrument.
5
Adjust the Volume balance between the
audio device and this instrument.
If possible, adjust the playback level of the audio
device first, to achieve optimum balance.
6
Stop playback of the audio device.
NOTICE
• To avoid possible damage to the external audio device
and this instrument, first turn on the power to the
external audio device, then to this instrument. Reverse
this order when you turn the power off.
20
PSR-E273 YPT-270 Owner's Manual
Audio device
(Smartphone. etc.)

Connecting Headphones or

External Speakers

Standard stereo
phone plug
Connect a pair of headphones to the [PHONES/
OUTPUT] jack. This jack also functions as an exter-
nal output. By connecting to a computer, keyboard
amplifier, recorder, or other audio device, you can
output the audio signal of this instrument to that
external device. The speakers of this instrument are
automatically shut off when a plug is inserted into
this jack.
CAUTION
• Do not use the instrument or headphones for a long period
of time at a high or uncomfortable volume level, since this
can cause permanent hearing loss.
• Before connecting the instrument to other electronic com-
ponents, turn off the power of all the components. Also,
before turning any components on or off, make sure to set
all volume levels to minimum. Otherwise, damage to the
components or electrical shock may occur.
NOTICE
• To avoid possible damage to the external device, first turn
on the power to the instrument, then to the external
device. Reverse this order when you turn the power off.

Using a Pedal (Sustain)

You can produce a natural sustain as you play by
pressing a footswitch (FC5 or FC4A; sold separately)
plugged into the [SUSTAIN] jack.
NOTE
• Plug or unplug the footswitch while the power is off. Also, do
not press the footswitch when turning the power on. Doing so
changes the polarity of the footswitch, resulting in reversed
operation.
• The sustain function does not affect Style (Auto Accompani-
ment; page 17).