sa41x6_QSG_01eng.qxd
1
Install
1 Insert the CD supplied with your product into the CD ROM drive of your PC.
2 Follow the on-screen instructions to complete the installation of Windows Media
Player 11 and Philips Device Manager.
2
Connect
Insert the battery
A
1 Remove the battery door by
sliding it in direction of the
arrow.
B
Read the battery level indication of your player
The approximate power levels of your battery are indicated as follows:
Full
TIP When the batteries are almost empty, the low battery screen
player will power down in less than 60 seconds. Your player will save all settings and
un-finished recordings before it powers down.
2007-06-27
2 Insert the supplied AAA
battery into the battery
compartment.
Two-thirds full
Half full
11:35 AM
Page 5
Low
Empty
blinks. Your
5