1
Install
1 Insert the CD supplied with your product into the CD ROM drive of your PC.
2 Follow the on-screen instructions to complete the installation of Philips Device
Manager.
2
Connect
Insert the battery
A
1 Remove the USB cap.
B
Read the battery level indication of your player
The approximate power levels of your battery are indicated as follows:
Full
Two-thirds full
Note When the batteries are almost empty, the low battery screen
player saves all settings and unfinished recordings and switches off in less than 60
seconds.
2 Remove the battery door
by sliding it in the
direction of the arrow.
Half full
Low
3 Inser the supplied AAA
battery into the battery
compartment.
Empty
blinks. The
5