MedPro 705-470 Instructions Manual page 7

NOTE: before first use, verify that all the components
illustrated are enclosed. If you did not receive all the
components listed, please contact the merchant where you
purchased this compressor nebulizer.
It is always a good idea to keep extra tubing and
accessories, as well as an extra air filter, on hand at all
times. They may be needed if parts become lost, soiled or
damaged. For more information on how to purchase parts,
please see your pharmacist or visit our website at: www.
amgmedical.com
1. Wash hands with soap and warm water, and dry
completely with a clean towel.
2. Place the compressor on a clean, dust-free, stable and
flat surface. Note : Check the filter monthly or every
10 – 12 treatment and replace if dirty, clogged or wet
to ensure proper operation.
Tubing and accessories are NOT sterile from
package.
3. Ensure that the tubing and accessories have been
cleaned and / or disinfected before first use, as well as
after the last treatment of the day. Refer to the cleaning
instructions on page 9 of this manual.
4. Remove the nebulizer cap, as illustrated, by turning
it counter-clockwise until it stops and lifts up.
5. Using an eyedropper or a
syringe, fill the nebulizer
cup with the prescribed
medication. Do not fill more
than 8 ml per treatment.
6. Close the nebulizer cap
and turn clockwise to
tighten shut.
5