Evaluation At The Club; Clear A Race (Release Pigeons For A New Race); Multi-Fancier Mode - Gantner BENZING M1 Manual

BENZING M1 - Club
OPERATION

4.1.4 Evaluation at the Club

Evaluation at the club takes place in three steps:
1. The race is stopped:
• comparison of the clocks
• pigeons arriving later are marked as 'not evaluated' pigeons
2. The race data is printed out on the printer
3. The race data is read by the PC and then converted by the software (such as
WINSPEED in such a way that the prize lists can be generated by a computer centre.
At any time it is possible to print a stopped (not cleared) race later or read the race data on
the PC later on.

4.1.5 Clear a Race (Release Pigeons for a New Race)

The basketed pigeons can only be basketed for a new race after they have finished the
previous one. It is possible to clear (finish) a race either in the fancier's mode or in the club
before basketing anew. In the club the evaluation must be finished too.
4.2

Multi-Fancier Mode

This manual describes the operation of the BENZING M1 as a device for one fancier. Also
available is the BENZING M1 multi-fancier device. It features the option of saving up to four
fanciers. Thus, several fanciers who share one loft are able to carry out races with the same
BENZING M1. The menu guide of the multi-fancier function varies only in a few steps from
that of the device for one fancier.
When operating a multi-fancier device a differentiation is required between the individual
fancier, that's why a menu for the selection of the fancier will be displayed. All the following
menus will indicate the respective active fancier using a number (1-4) on the display at the
above left. Each finished procedure corresponds only to the active fancier and has no
influence whatsoever on the other fanciers.
HB_BENZING-M1_CLUB-EN_13.doc
GANTNER Pigeon Systems GmbH
17