Table of Contents
Advertisement
About Plug-and-Play
Jumper Changes
You may be able to change the IRQ & I/O values
for a given PCI slot by setting jumpers on your PC
mother board. Please refer to your PC's mother-
board user guide for specific instructions.
Menu Changes
Your PC may allow you to change the IRQ & I/O
values for a given PCI slot by accessing the PC's
BIOS setup menu. Please refer to your PC's user
guide for specific details. The BIOSs from compa-
nies like AMI and Award are fully customizable
from their BIOS menus, for example.
Note: Moving the HomeLink Network Card to a
different slot may change the settings for the card.
Plug-and-Play BIOS list
®
Generally, all computers with Pentium
or
®
Pentium II (or compatible, such as AMD
's K6)
processors have a Plug-and-Play BIOS. Here's a
list for you to double-check or if you're unsure:
• Pheonix 4.04 or higher
• Award 4.50 PG or higher
• AMI dated after 9/94
A Pentium (or compatible) motherboard and a
Pentium 90 processor or faster is recommended. If
your BIOS is not on this list, it doesn't automati-
cally mean that your BIOS is not Plug-and-Play
compatible. Consult the documentation that came
with your PC or contact your PC's manufactuer to
be sure.
8
Advertisement
Table of Contents
