Additional Information; Power Light; Frequently Asked Questions - Philips SPV3000/05 User Manual

10 Additional information

10.1

Power light

The blue power light inside the power button
of the PhotoViewer shows the status of the
PhotoViewer.
If the power light is on:
• The PhotoViewer is on (and connected to a
power outlet)
• A memory card is inserted and/or a USB disk
is connected.
If the power light fl ashes slowly (once every 2
seconds):
• The PhotoViewer is reading the inserted
memory card and/or connected USB disk.
If the power light fl ashes fast (twice every
second):
• A software upgrade is in progress.
If the power light pulses ('heartbeat' every six
seconds):
• The PhotoViewer is in the standby mode.
If the power light is off:
• The PhotoViewer is off (or disconnected from
the power outlet).

11 Frequently asked questions

Set up
I do not see the user interface of the
PhotoViewer on the TV.
• Set the TV to the correct programme
number (for example, EXT, 0, AV).
See the documentation that came with
your TV.
01_Picture viewer SPV3000_0807_E19 19 01_Picture viewer SPV3000_0807_E19 19
There is no sound signal from the TV or
audio system.
• Check if the audio cables are connected
correctly.
• Check if the volume of your TV or audio
system is turned on.
• Make sure that the fi le format of your audio
fi les is MP3 and that the fi les do not have
copy protection.
Use (more of) your PhotoViewer
The PhotoViewer does not react when I
press a button on the remote control.
• When you press a button on the remote
control, point the remote control in the
direction of the power switch of the
PhotoViewer.
• Replace the battery of the remote control
The picture seems to be transformed.
• Change the resolution with the resolution
button on the remote control.
• Change the settings of the connected TV.
See the documentation that came with
your TV.
The connected printer does not react.
• Make sure that the printer is switched on.
• Make sure that the printer is connected
to the USB port at the back of the
PhotoViewer.
• Change the settings of the connected printer.
See the documentation that came with your
printer.
• Make sure that the printer is an Epson
printer*.
See the website www.philips.com/support
for more questions and answers.
* Compatible with any Epson PictureMate plus other models,
please see www.philips.com/welcome for more information.
19
8/7/07 2:48:02 PM 8/7/07 2:48:02 PM