Use A Printer; Connect To A Printer; Print Pictures; From The Thumbnail View - Philips SPV3000/05 User Manual

5.10 Upgrade the fi rmware
Download the latest software from www.
1
philips.com/support.
Note
If necessary, unpack the downloaded fi rmware.
Copy the fi le to the root of a USB disk.
2
Note
Do not rename the fi le or put it in a folder.
Switch the PhotoViewer off.
3
Switch the PhotoViewer back on.
4
Connect the USB disk to the front of the
5
PhotoViewer.
Caution
Do not touch the buttons on the PhotoViewer
or its remote control until the Firmware
update message shows.
Select OK on the screen and press the OK
6
button (3).
Follow the on-screen instructions.
7
6

Use a printer

6.1

Connect to a printer

You can connect your PhotoViewer to an Epson
printer*. If you do so, you can print the pictures
without a PC!
Note
See the documentation that came with your
printer for more information about your printer.
1. Connect the printer cable to the USB port
(D) on the PhotoViewer.
2. Connect the other end of the printer cable
to the printer.
11
* Compatible with any Epson PictureMate plus other models,
please see www.philips.com/welcome for more information.
01_Picture viewer SPV3000_0807_E15 15 01_Picture viewer SPV3000_0807_E15 15
3. Connect the power adapter of the
PhotoViewer to an power outlet.
4. Connect the printer to an power outlet.
6.2

Print pictures

6.2.1 From the thumbnail view

To print a single picture from the thumbnail
view:
Select the picture that you want to print.
1
Press the print button (5).
2
The printer starts.
To print multiple pictures from the
thumbnail view:
Select the picture that you want to print.
1
Press the mark button (4).
2
The picture is marked.
Select the next picture.
3
Press the mark button (4).
4
The picture is marked.
Repeat the steps above for all other pictures
5
that you want to print.
Press the print button (5).
6
The printer starts.
11
12
12
10
10
12
15
8/7/07 2:47:58 PM 8/7/07 2:47:58 PM