In The Thumbnail View 13; Make A Slideshow From Selected Pictures; In The Full-Screen View; In The Slideshow View - Philips SPV3000/05 User Manual

5.6 Make a slideshow from selected
pictures
In the thumbnail view, all the pictures on the
inserted memory card or the connected USB
disk show. The PhotoViewer also shows the
pictures that you stored in folders, but the
folders themselves do not show.
If the inserted memory card or the connected
USB disk contains more pictures than you want
to view in your slideshow, you can mark the
thumbnails before you start the slideshow. If you
do, the PhotoViewer makes a slideshow of the
marked pictures.
Go to the thumbnail view.
1
Select the picture that you want to view.
2
Press the mark button (4).
3
The picture is marked.
Select the next picture.
4
Press the mark button.
5
The picture is marked.
Repeat the steps above for all other pictures
6
that you want to view.
Press the play-pause button (10).
7
The slideshow starts.
Tip
With Select all and Deselect all in the
Options menu, you can select and deselect all
pictures in the thumbnail view.
14
01_Picture viewer SPV3000_0807_E14 14 01_Picture viewer SPV3000_0807_E14 14
5.7
5.7.1 In the thumbnail view
1

5.7.2 In the full-screen view

2
3
The fi le information remains on the screen for
the next pictures.
10

5.7.3 In the slideshow view

10
1
2
To resume the slideshow, press the
play button (10).
5.8
10
1
2
3
OR
1
5.9
1
2
View fi le information
Select the thumbnail.
The fi le information shows in the right panel.
Go to the Options menu.
Select Info and press the OK button (3).
The fi le information shows.
Note
Go to the Options menu.
Select Info and press the OK button (3).
The full-screen view and the fi le information
show.
Tip
Reset the factory settings
Go to the Setup menu.
Select Reset to default settings.
Press the OK button (3).
The factory settings are restored.
With a paperclip, press-and-hold the reset
button (I) on the back of the PhotoViewer
for 10 seconds.
The factory settings are restored.
View the fi rmware version
Go to the Setup menu.
Select Firmware version.
The fi rmware version shows.
8/7/07 2:47:58 PM 8/7/07 2:47:58 PM