Horizon Fitness T202 Owner's Manual page 13

ASSEMBLY STEP 2
HARDWARE FOR STEP 2
PART TYPE
A HEX SOCKET BOLT
A
4
3
2
DESCRIPTION QTY
M8X1.25PX60L 3
A
A Open HARDWARE FOR STEP 2.
Pull the CONSOLE CABLE (3) away from the
B
treadmill base frame. Connect the CONSOLE
CABLE (3) from the MAIN FRAME (2) to the
CONSOLE CABLE (3) in the bottom of the RIGHT
CONSOLE MAST (4). The other end
of the CONSOLE CABLE (3) should be located at
the top of the mast.
C Attach RIGHT CONSOLE MAST (4)
to MAIN FRAME (2) using 3 BOLTS (A).
NOTE: Be careful not to pinch the console cable
while attaching the right console mast.
NOTE: Do not fully tighten bolts until STEP 5.
13