Turn on the PhotoFrame
Note
•
When you connect the PhotoFrame to a
power supply, the PhotoFrame turns on
automatically.
1
When the PhotoFrame is turned off and
connected to the power supply, hold
turn on the PhotoFrame.
For the first time you turn on the
PhotoFrame:
•
The screen prompts you to select a
language.
•
Select a language, and then press
OK.
8
EN
•
The screen prompts you to set time
and date.
to
•
Move the joystick to set time and
date, and then press OK.
Tip
•
If the PhotoFrame is disconnected from the
power supply for a long time, you need set
time and date again after you turn on the
PhotoFrame.
Turn off the PhotoFrame
Note
•
You can only turn off the PhotoFrame after all
copy and save actions are complete.
•
To turn off the PhotoFrame, press and
hold
for about 2 seconds.