Turn On The Photoframe; Turn Off The Photoframe; Transfer Photos - Philips SPF1208/10 User Manual

Turn on the PhotoFrame

Note
‡
When you connect the PhotoFrame to a
power supply, the PhotoFrame turns on
automatically.
1
When the PhotoFrame is turned off and
connected to the power supply, you can
press BACK|POWER to turn on the
PhotoFrame.
» A few seconds later, the home screen
is displayed.
)RU WKH ÀUVW WLPH \RX WXUQ RQ WKH
PhotoFrame:
‡ The screen prompts you to select a
language.
‡ Press / to select a language, and
then press OK WR FRQÀUP

Turn off the PhotoFrame

Note
‡
You can only turn off the PhotoFrame after all
copy and save actions are complete.
‡ To turn off the PhotoFrame, press and
hold BACK|POWER for 2 seconds.

Transfer photos

Caution
‡
Do not remove a storage device from the
PhotoFrame when you are transferring photos
from the storage device.
You can play JPEG photos on one of the
following storage device that is connected to
the PhotoFrame:
‡ Secure Digital (SD)
‡ Secure Digital High Capacity (SDHC)
‡ Multimedia Card (MMC)
‡ Memory Stick (MS)
‡ Memory Stick Pro (MS Pro, with adaptor)
However, we do not guarantee the operations
for all types of storage device media.
1
Insert a storage device into the slot.
» $ FRQÀUPDWLRQ PHVVDJH LV GLVSOD\HG
EN 7