Cisco UCS B420 M4 Installation And Service Note page 15

Servicing the Blade Server
Figure 6: Removing and Installing a Drive
Installing a Blade Server Drive
To install a drive in a blade server, follow these steps:
Procedure
Step 1 Place the drive ejector into the open position by pushing the release button.
Step 2
Gently slide the drive into the opening in the blade server until it seats into place.
Step 3 Push the drive ejector into the closed position.
You can use Cisco UCS Manager to format and configure RAID services. For details, see the Configuration
Guide for the version of Cisco UCS Manager that you are using. The configuration guides are available at
the following URL:
http://www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html
Cisco UCS B420 M4 Blade Server Installation and Service Note
Installing a Blade Server Drive
13