Vivitek DK10000Z User Manual
  1. Manuals
  2. Brands
  3. Vivitek Manuals
  4. Projector
  5. DK10000Z
  6. User manual

Vivitek DK10000Z User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual
User's Manual
DK10000Z

Advertisement

Table of Contents
loading

Related Manuals for Vivitek DK10000Z

Summary of Contents for Vivitek DK10000Z

  • Page 1 User's Manual User's Manual DK10000Z...

  • Page 2: Table Of Contents

    DK10000Z Series DLP Projector - User Manual Index I/O - Connecting HDBaseT/LAN Ethernet Trigger Copyright RS-232 Copyright Wired Remote Disclaimer HDMI 1 / 2 About the Manual DisplayPort Important Safety Guidelines SDI IN / OUT Safety Notification Using the projector...
  • Page 3 DK10000Z Series DLP Projector - User Manual OSD Menu – CONTROL Language Projection Mode High Altitude Standby Mode Auto Power Off Auto Power On Network Light Power Background Startup Logo Infrared Remote Trigger OSD Settings HDMI Equalizer Image Latency OSD Menu – SERVICE...

  • Page 4: About The Manual

    All rights are reserved. No duplication of the manual or any content included in the manual is allowed without the written consent of the manufacturer. Vivitek is the trademark of Vivitek Corporation. ©All rights reserved. 2019. Disclaimer The information in the manual is subject to change without notice. The manufacturer does not provide any statement or warranty of the contents in the manual and clearly give up the implied warranties of merchantability and of fitness for a particular purpose.
  • Page 5 If the above scenario occurs, the user may be responsible to correcting the interference. WARNING WARNING! Changes or modifications without approval from Vivitek could void the user’s authorization to oper- ate the product. UM100000823EN03...
  • Page 6 DK10000Z Series DLP Projector - User Manual LIGHT MODULE • A light module containing multiple laser diodes acts as the light source in the product. • These laser diodes are sealed in the light module. It is recommended to ask dealer for maintenance or repair services of the light module.

  • Page 7: Disposal Of Old Electric And Electronic Equipment

    DK10000Z Series DLP Projector - User Manual Installation and Use Notices 1. Read and keep this manual properly. 2. Pay attention to all the noted warnings, and follow all the guidelines and descriptions in this manual. 3. Do not use the projector near water.

  • Page 8: Packing Checklist

    You can find the latest version of the Manual and the manual of other Vivitek products on www.vivitekcorp.com. Packing Checklist The following items are included in the packaging box of the DK10000Z projector. If any loss or damage to any item, contact your dealer or Vivitek customer service department.

  • Page 9: Projector Overview

    DK10000Z Series DLP Projector - User Manual Projector Overview Front-right View 1. Front IR Receiver The Receiver for IR signals from remote control. 2. LED Indicator Display current projector status such as power, light source status and warning. 3. Air Intake The fan pulls the cool air to the projector for system cooling.

  • Page 10: Bottom View

    DK10000Z Series DLP Projector - User Manual Bottom View 15. Anti-thief Screw hole The anti-thief screw can be fastened to prevent Lens removing by unauthorized person. 16. Mounting Holes of Support Kit These two screws holes can be used to fix support kits of ultra-short throw lens.
  • Page 11 DK10000Z Series DLP Projector - User Manual IO Panel RS232 TRIGGER WIRED REMOTE HDBaseT / LAN Ethernet DisplayPort HDMI HDMI SDI IN SDI OUT TRIGGER(12V +/-1.5V) Ethernet When connected to the screen through a 3.5mm cable, Connect an Ethernet cable (Cat5e/Cat6, not supplied)

  • Page 12: Control Panel

    DK10000Z Series DLP Projector - User Manual Control Panel ENGER POWER CENTER LENS User the button to turn on/off the projector. Push the button to center the lens and calibrate the pa- rameter of lens shift, focusing and zooming. Note...

  • Page 13: Remote Control

    MENU EXIT BLANK Press the button to temporarily interrupt the projection. AUTO PC BLANK STATUS STATUS Show OSD MENU – SERVICE. Select VGA input source. (not applicable for DK10000Z COMPONENT ASPECT series) COMPONENT Select Component input source. HDMI1 HDMI2 ASPECT Press the button to display aspect ratio options.
  • Page 14 DK10000Z Series DLP Projector - User Manual Remote Control Operating Range The remote control uses infrared transmission to control the projector. It is not necessary to point the remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or the rear of the projector, the re- mote will function well within a radius of about 10 meters (25 feet) and 15 degrees above or below the projector level.
  • Page 15 DK10000Z Series DLP Projector - User Manual Installation and Setting up Inserting or Changing the Remote Control Batteries 1. Remove the battery compartment cover by sliding the cover in the direction of the arrow. 2. Place two AA batteries with the correct polarity.

  • Page 16: Precautions For Installation

    DK10000Z Series DLP Projector - User Manual Installing the projector The high quality display effect can be guaranteed only when the projector is correctly installed. Generally, the light source facing the screen should be reduced or eliminated as much as possible. The contrast of the image will be obvi- ously reduced if the light directly shines on the screen, such as the beam from windows or the searchlight cast on the image.

  • Page 17: Mounting The Projector

    DK10000Z Series DLP Projector - User Manual Mounting the projector For mounting the projector, please use UL Listed ceiling mounts and M4 screws, maximum depth of screw: 14 mm. UM100000823EN03...

  • Page 18: Install New Lens

    DK10000Z Series DLP Projector - User Manual Installing or Removing the Optional Lens Caution • Do not shake or place excessive pressure on the projector or the lens components as the projector and lens components contain precision parts. • When shipping the projector with the optional lens, remove the optional lens before shipping the projector. The lens and the lens shift mechanism may encounter damage caused by improper handling during transportation.
  • Page 19 DK10000Z Series DLP Projector - User Manual Removing the Existing Lens 1. Push the LENS RELEASE button all the way in and rotate the lens counterclockwise. The existing lens will be disengaged 2. Pull out the existing lens slowly. Caution •...

  • Page 20: Turning On The Projector

    DK10000Z Series DLP Projector - User Manual Selecting the Input Voltage of AC Power There is one slide switch near AC switch, pleases switch it to corresponding input voltage of AC power. Please switch it to 115V if the input voltage range is 100V to 130V, switch to 230V if input voltage range is 200V to 240V.

  • Page 21: Turning Off The Projector

    DK10000Z Series DLP Projector - User Manual 3. The Power LED and LIGHT LED flashes green till power on process is finished. 4. After few seconds, both LEDs keep green, the projector is ready for use. Turning off the Projector Once the projector is no longer required, it is important to shut it down correctly to avoid damage or unnecessary wear and tear to the projector.
  • Page 22 DK10000Z Series DLP Projector - User Manual Setting up the installation condition This projector is designed for set up in all angle including desktop, ceiling, portrait and free-tilt installation as below illustration. Please set the cooling condition according to the projector installation as below.

  • Page 23: Adjusting The Focus And Zoom

    DK10000Z Series DLP Projector - User Manual Adjusting Projected Image Position This projector has the powered lens shift feature; the image can be shifted vertically or horizontally without moving the projector. The lens shift range is shown in the percentage of the screen height and width, the maximum vertical shift range can be up to 64% of the projected image height and down to 33% of the height, and maximum horizontal shift range is 24% of the image width to right, 14% of the image width to the left.

  • Page 24: Locking The Control Buttons

    DK10000Z Series DLP Projector - User Manual Preventing the Unauthorized Use of the Projector Using the Control Panel Lock This function allows you to lock control panel on the projector to prevent accidental presses by an individual or unau- thorized person to control the projector.

  • Page 25: Enable The Security Lock

    DK10000Z Series DLP Projector - User Manual Unlocking the control panel Once Control Panel Lock is enabled, all of control buttons on the projector are disabled. Please enter the OSD option CONTROL>OSD Settings>Control Panel Lock then select Off to unlock the control panel by remote control.

  • Page 26: Unlocking The Projector

    DK10000Z Series DLP Projector - User Manual Security Lock is turned on, the pop-up message will be shown Lock as below, select OK to confirm or Cancel to ig- nore the setting. Security Lock Security Lock will be active in next power cycle, sure ?

  • Page 27: Using Control Id For Multi-Projector Application

    DK10000Z Series DLP Projector - User Manual Using Control ID for Multi-projector Application When installing more than one projector in the room, the projectors may receive the remote control signal at the same time. In this case, you can use control ID function to specify the identification of the projector and remote control to operate the specified projector.

  • Page 28: Step2: Set The Identification Number Of Remote Control

    DK10000Z Series DLP Projector - User Manual Step2: Set the identification number of remote control The remote control has 2 ways to operate the projector. • Use 1 remote control to operate 2 projector. Each remote control can record 2 ID control code. Press ID SET+MENU 5 seconds at the same time.

  • Page 29: Checking The Identification Number Of The Projector And Re Mote Control

    DK10000Z Series DLP Projector - User Manual Checking the identification number of the projector and remote control The identification number of the projector and remote control can be checked by SERVICE menu as below figure, “X” represents that the function is not enabled; the number 26 is the current identification number of the remote control.

  • Page 30: Hdbaset/Lan

    DK10000Z Series DLP Projector - User Manual I/O - Connecting HDBaseT/LAN This projector supports network control. LAN and HDBaseT use the same port. If you only use network control, you can connect the LAN on the projector to your PC or connect via the network. Please refer to the projector's Remote Communication Manual.

  • Page 31: Ethernet

    DK10000Z Series DLP Projector - User Manual Ethernet This port can receive network control signals or be used as a software update for the projector. Cconnect to a computer directly or connect to an Ethernet hub to remotely control the projector...

  • Page 32: Wired Remote

    DK10000Z Series DLP Projector - User Manual Wired Remote When the infrared remote control cannot directly control the projector (for example,too far awaybeteen projector and remote control or there are obstacles in the middle), users can purchase the 3.5 MM stereo universal cable that is common in the market to overcome these problems.
  • Page 33 DK10000Z Series DLP Projector - User Manual DisplayPort DisplayPort is a digital video interface standard with serial connection function. It can use the Hub or screen to achieve multi-screen output, and can be used alone as a video output device. This projector supports the new gen- eration of DisplayPort signal standards.

  • Page 34: Navigating The Osd

    DK10000Z Series DLP Projector - User Manual Using the projector Using On-Screen Display Using the OSD Menu The projector has an On-Screen Display (OSD) that lets you make image adjustments, change various settings, check the current status of the projector, etc.

  • Page 35: Menu Tree

    DK10000Z Series DLP Projector - User Manual Menu Tree Use the following table to quickly find a setting or determine the range for a setting. INPUT 2nd Layer 3rd Layer 4th Layer Selections Input Selection DisplayPort / HDMI1 / HDMI2 / HDBaseT / 3G-SDI...
  • Page 36 DK10000Z Series DLP Projector - User Manual ALIGNMENT 2nd Layer 3rd Layer 4th Layer Selections Lens Lock Off / On Lens Control Zoom / Focus / Shift control Lens Type non-UST Lens / UST Lens Lens Load Memory Memory1 / Memory2 / Memory3 / Memory4 / Memory5 /...
  • Page 37 DK10000Z Series DLP Projector - User Manual CONTROL 2nd Layer 3rd Layer Selections English / Français / Español / Deutsch / Português / 简体中文 / 繁體中文 / 日本語 / 한국어 Language Projection Mode Front Desktop / Front Ceiling / Rear Desktop / Rear Ceiling...

  • Page 38: Input Selection

    DK10000Z Series DLP Projector - User Manual OSD Menu – INPUT INPUT PICTURE ALIGNMENT CONTROL SERVICE HDMI2 Input Selection 3G-SDI < > Auto Source < > Color Space Auto < > Aspect Ratio Source < > Overscan Test Pattern Auto Sync...

  • Page 39: Auto Source

    DK10000Z Series DLP Projector - User Manual Position Set the preferred location of PIP window. Top Left Display sub picture at top left of the screen. Bottom Left Display sub picture at bottom left of the screen. Top Right: Display sub picture at top right of the screen.

  • Page 40: Test Pattern

    DK10000Z Series DLP Projector - User Manual Test Pattern The built-in images are provided for installation and adjustment. You can select Test Pattern on OSD or the TEST PATTERN hot key on the remote control to show the test pattern. Press the ◄ or ► to select pattern or press EXIT key again to exit the test pattern.

  • Page 41: Picture Mode

    DK10000Z Series DLP Projector - User Manual OSD Menu – PICTURE INPUT PICTURE ALIGNMENT CONTROL SERVICE Picture Mode High Bright Brightness Contrast Saturation Sharpness Color Temperature Native Gamma Auto Input Balance MENU = Back Item Adjust Scroll Picture Mode Use ◄or► to select desired picture mode...

  • Page 42: Input Balance

    DK10000Z Series DLP Projector - User Manual Compared with High HDR (Dynamic Range Imaging) and SDR (Standard Dynamic Range), HDR can make the bright area more bighter, Dark area more darker. The color performance will better then traditional SDR, especially the high-brightness block in the picture will has better reduction.
  • Page 43 DK10000Z Series DLP Projector - User Manual OSG Menu – ALIGNMENT INPUT PICTURE ALIGNMENT CONTROL SERVICE Lens Digital Zoom Blanking Keystone 4 Corners Rotation Pincushion / Barrel Edge Blend Screen Format 16:9 MENU = Back Item Adjust Scroll Lens Lens Lock...
  • Page 44 DK10000Z Series DLP Projector - User Manual Note There are two default positions, one is for regular zoom or fixed focus lens (Non-UST), the reference position is 0% of image width in horizontal shift and 0% of the image height in vertical shift;...

  • Page 45: Digital Zoom

    DK10000Z Series DLP Projector - User Manual Digital Zoom Press ENTER button to select the options to enlarge the image or shift the image. Digital Zoom Press ◄► to enlarge the projected image or retract the enlarged projected image back to the original projected image size.

  • Page 46: Edge Blend

    DK10000Z Series DLP Projector - User Manual Press ◄► to correct distorition of indivisual side including top, bottom, left or right side. Edge Blend Edge Blend function requires multiple projectors to simultaneously project on the same screen. Use this function to adjust the uniformity of image.

  • Page 47: Osd Menu - Control

    DK10000Z Series DLP Projector - User Manual OSD Menu – CONTROL INPUT PICTURE ALIGNMENT CONTROL SERVICE Language Projection Mode Front Desktop High Altitude Auto Standby Mode Saving Auto Power Off < > Auto Power On < > Network Light Power...

  • Page 48: Standby Mode

    DK10000Z Series DLP Projector - User Manual Standby Mode Saving standby power consumption less than 0.5W, Ethernet control function is not workable. standby power consumption less than 3.0W, Ethernet control function is workable but HDBaseT is not available. Normal standby power condusmption less than 6.0W; HDBaseT only can work at this condition.

  • Page 49: Light Power

    DK10000Z Series DLP Projector - User Manual Light Power Use ◄ ►button to select the power save mode (Eco), normal (Normal) or custom power level. Light Power ECO : Projection operates in the energy-saving mode, which is equivalent to 80 % power of light source.

  • Page 50: Trigger

    DK10000Z Series DLP Projector - User Manual Trigger The projector is provided with a set of trigger output. User can connect the trigger to the screen with projector by the cable. If user does so, once the projector is powered, the screen would be automatically turned on as well. There is a 2-3 second delay to activate this function.

  • Page 51: Osd Menu - Service

    DK10000Z Series DLP Projector - User Manual OSD Menu – SERVICE INPUT PICTURE ALIGNMENT CONTROL SERVICE Model DK10000Z-BK Serial Number W842ZIPCY0018 Software Version 1 ME08-VE08-FE03-0.0.356 Software Version 2 LD15-28-18-3120 Software Version 3 2.0.36.0-P503 Control / Remote ID Active Source HDMI 2 Signal Format 1920x1080@99.6Hz...

  • Page 52: Additional Information

    DK10000Z Series DLP Projector - User Manual Additional Information Product Specification Display Type Single Chip 0.66" DLP Technology Brightness *** 10000 Lumen Native Resolution 4K-UHD(3840 x 2160) with Smooth Picture On Maximum Resolution 4K-UHD(3840 x 2160) @ 60Hz Contrast Ratio 6000:1 (Typ.

  • Page 53: Supported Signal Input Timing

    DK10000Z Series DLP Projector - User Manual Supported Signal Input Timing 2D formats HDMI 1/2 / HDBaseT HD/SDI/3G Output Frame Rate Signal Format Resolution Display Port See page Frame Rate (Hz) (8-bit) (10-bit) (12-bit) “SDI Format” (Hz) 640 x 59.94 640 x 480 74.99...
  • Page 54 DK10000Z Series DLP Projector - User Manual HDMI 1/2 / HDBaseT HD/SDI/3G Output Frame Rate Signal Format Resolution Display Port See page Frame Rate (Hz) (8-bit) (10-bit) (12-bit) “SDI Format” (Hz) 1035i 1080i 1080i 59.94 1080i 720p 720p 59.94 720p...

  • Page 55: Sdi Format

    DK10000Z Series DLP Projector - User Manual 3G-SDI Format Color Sampling Timing SDI Link mode Signal Standards Bit Depth Remark Encode Structure NTSC SMPTE 259M-C 270Mbps SD YCbCr 4:2:2 128M SMPTE 259M-C 270Mbps SD YCbCr 4:2:2 128M 1035i60 SMPTE 292M 1.5Gbps HD...

  • Page 56: Configurations Of Terminals

    DK10000Z Series DLP Projector - User Manual Configurations of Terminals HDMI(19 pin Type A) Serial Control Termina (RS-232, D-sub 9 pin) 1 3 5 7 9 11 13 15 17 19 2 4 6 8 10 12 14 16 18 T.M.D.S.

  • Page 57: Lens Series

    DK10000Z Series DLP Projector - User Manual Lens Series Eight types of optional electric lenses are available for the projector as below table. Contact the authorized dealer of Vivitek for details. Part Number Lens Name F Number Focal Length Zoom Ratio...

  • Page 58: Product Dimensions

    DK10000Z Series DLP Projector - User Manual Product Dimensions 500mm UM100000823EN03...

  • Page 59: Led Indication

    DK10000Z Series DLP Projector - User Manual LED Indication Several indicators messages are used to display the current projector status or alert the abnormal message. Power LED LED Display Projector status Procedure AC Power is turned off Green Projector is turning on.

  • Page 60: Tips For Troubleshooting

    DK10000Z Series DLP Projector - User Manual Common Problems and Solutions These guidelines provide tips to deal with problems you may encounter while using the projector. If the problem re- mains unsolved, contact your dealer for assistance. Often the problem is something as simple as a loose connection. Check the following before proceeding to the prob- lem-specific solutions.

  • Page 61: Projection Problems

    DK10000Z Series DLP Projector - User Manual Problem: The color of the projected image does not match the source image. Adjust the Color temperature and Gamma settings on the PICTURE menu of the OSD Projection Problems Problem: There is no light from the projector 1.

  • Page 62: About The Vivitek Support

    DK10000Z Series DLP Projector - User Manual About the Vivitek Support If you cannot find solutions from this user guideline, please contact us using the contact information below: North America Vivitek Service Center Tel: 855-885-2378 (Toll-Free) 15700 Don Julian Road, Suite B Email: T.services1@vivitekcorp.com...

Table of Contents