Electrical Safety; Personal Safety - Milwaukee M18 2607-059 Operator's Manual

estiver danificada, envie-a para a assistência técnica
autorizada mais próxima. Após seis meses ou um
ano, dependendo do uso, envie a ferramenta a as-
sistência técnica autorizada Milwaukee mais próxima
para a inspeção.
Se a ferramenta não iniciar ou funcionar na potência
total com a bateria totalmente recarregada, limpar os
contatos da bateria. Se a ferramenta não funcionar
adequadamente, enviar a ferramenta, a bateria e
o carregador para conserto na assistência técnica
da MILWAUKEE.
Para reduzir o risco de ferimentos,
AVISO
choques elétricos e danos à ferra-
menta, nunca mergulhe a ferramenta em líquido
nem permita que líquidos entrem em contato com
a parte interna da ferramenta.
Limpe poeira e resíduos nos orifícios de ventilação.
Mantenha as alças limpas e livres de óleo ou graxa.
Use somente sabão suave e um lenço de limpeza
umedecido para limpar a ferramenta, pois certos
agentes de limpeza e solventes causam danos aos
plásticos e a outras peças revestidas. Veja alguns
exemplos desses agentes: gasolina, terebentina,
solventes, solventes de tinta, solventes de limpeza à
base de cloro, amônia e detergentes domésticos que
contêm amônia. Nunca use solventes inflamáveis ou
combustíveis perto das ferramentas.
Se a ferramenta estiver danificada, envie-a para a
assistência técnica autorizada mais próxima.
ACESSÓRIOS
Usar apenas acessórios especifica-
AVISO
mente recomendados para esta fer-
ramenta. Outros acessórios podem ser perigosos.
Para obter uma listagem completa de acessórios,
visite www.milwaukeetool.com ou entre em contato
com o seu distribuidor.
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING Read all safety warnings, instruc-
tions, illustrations and specifica-
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
Limpeza
Reparos
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of an GFCI reduces
the risk of electric shock.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust
mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energizing power tools that have the switch
on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
• Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of the
power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct
power tool for your application. The correct power
tool will do the job better and safer at the rate for
which it was designed.
• Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
12