Fujitsu LIFEBOOK P8010 Manual page 62

Problem
Video Problems
Power On Self Test
The LifeBook
notebook turned (POST) has detected a
on with a series of failure which does not
allow the display to
beeps and your
built-in display is operate.
blank.
The display goes The notebook has gone
blank by itself after into Video timeout,
Standby mode, Suspend
you have been
using it for a period mode or Save-to-Disk
of time. mode because you have
not used it for a period of
time.
The system may be
Your system
display won't turn password protected.
on when the
system is turned
on or when the
system has
resumed.
The built-in display A foreign object, such as a
paper clip, is stuck
does not close.
between the display and
the keyboard.
The built-in display If the spots are very tiny
has bright or dark and few in number, this is
normal for a large LED
spots.
display.
If the spots are numerous
or large enough to
interfere with your
operation needs.
50
Possible Cause
Contact your support representative.
Press any button on the keyboard, or move
the mouse to restore operation. If that fails,
push the Power/Suspend/Resume button.
Check your power management settings, or
close your applications and go to the Power
Savings menu of the setup utility to adjust the
timeout values to better suit your operation
needs.
Check the Status Indicator Panel to verify that
the Security icon is blinking. If it is blinking,
enter your password.
Remove all foreign objects from the keyboard.
This is normal; do nothing.
Display is faulty; contact your support
representative.
Possible Solution