Advertisement
UK
TABLE OF CONTENTS
1.0
- PRELIMINARY ADVICE.............................................................................................
2.0
- TECHNICAL DATA...................................................................................................
USER MANUAL
3.0
- OPERATING DESCRIPTION.....................................................................................
3.1 - System arming..........................................................................................................
3.2 - Arming inhibit time....................................................................................................
3.3 - System armed..........................................................................................................
3.4 - Alarm, inhibit time between alarms and alarm cycles..............................................
3.5 - System disarming.....................................................................................................
4.0
- GARAGE FUNCTION................................................................................................
5.0
- ANTI-HIJACK FEATURE............................................................................................
5.1 - Vehicle running: normal functioning
5.2 - Vehicle running: agression and hijack
5.3 -
Vehicle running: anti-hijack activation
5.4 - Deactivation of anti-hijack feature............................................................................
6.0
- TAG CARD ACTIVATION AND BATTERY REPLACEMENT.......................................
7.0
- WARRANTY CONDITIONS........................................................................................
.
INSTALLER MANUAL
8.0
- CONNECTOR TABLE.................................................................................................
9.0
- COMPLETE ELECTRIC DIAGRAM...........................................................................
10.0
-
ADDING NEW DEVICES.................................
11.0
- DELETING OF PROGRAMMED DEVICES
12.0
-
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEE) DIRECTIVE........
1.0 - PRELIMINARY ADVICE
Dear customer,
The following signs are intended to draw user and installer attention to particular functions or
connections as follows:
Indications useful for the user.
This icon provides the user with indications for a diversificated use of the system or it
simply provides indications useful for the use.
Indications useful for the installer.
This icon indicates to the installer a diversificated operating, according to the connection
!
and the programming of the system or it simply provides indications useful for the
2.0 - TECHNICAL DATA
Operating power
Current absorption @ 12Vdc with system armed and LED flashing
Operating temperature range
Turn signals relay contact capabilty
Engine immobilisation relay contact capability
Alarm cycle
Horn output current capacity
PAGE 02
.........................................................................
......................................................................
......................................................................
.........................................................
..............................................................
installation.
Less than 15 mA
From -30°C to +70°C
PAGE 02
PAGE 02
The system arms automatically 30" after turning off the engine (lack of ignition key contact) as long as
PAGE 03
no TAG transmission is detected.
PAGE 03
Opening a door 30" before the system is armed temporarily interrupts the procedure which will resume
PAGE 03
once the door is closed.
PAGE 03
PAGE 03
The inhibit arming time lasts for approxiately 8" and is indicated by the status LED turning ON steady;
PAGE 03
during this period it's possible to exit the vehicle without triggering any alarm.
PAGE 03
PAGE 04
PAGE 04
After the inhibit time the system is "armed" and it is ready to detect any theft attempt.
PAGE 04
When the system fully armed, the LED flashes.
PAGE 04
3.4 - ALARM, INHIBIT TIME BETWEEN ALARMS AND ALARM CYCLES
PAGE 04
PAGE 05
Before any audio/visual signalling of the alarm occurs there is a 16" pre-alarm neutral time (LED
PAGE 05
steady ON).
The system indicates theft attempts by visual/audio signals (flashing of the turn indicators and
intermittent sounding of the vehicle horn).
PAGE 06
After the alarm event, but before another alarm is triggered, there is a 5" neutral time.
PAGE 07
The alarm signalling has 5 cycles of 30" each for each input and for each arming cycle.
PAGE 08
PAGE 09
PAGE 09
If the system is armed, it will start disarming upon detecting your TAG; the disarming procedure will
then be completed when the driver door is opened.
This garage feature "deactivates" the system and is useful wnen the vehicle is in a
The garage feature can be activated with system armed or disarmed
its receptacle while the driver door is opened
System deactivation is indicated by three acoustic signals of the buzzer.
To reactivate the system simply introduce the electronic key in its receptacle
System activation is indicated by an acoustic signal of the buzzer.
To activate the garage feature during an alarm condition or during a hijack attempt (vehicle running)
simply introduce the electronic key in its receptacle (door either opened or closed).
When the "garage feature" is ON, the status LED blinks twice followed by a 2 seconds
12 Vdc
8 A to 20°C
8 A to 20°C
30 sec.
5 A
USER MANUAL
3.0 - OPERATING DESCRIPTION
3.1 - SYSTEM ARMING
3.2 - ARMING INHIBIT TIME
3.3 - SYSTEM ARMED
3.5 - SYSTEM DISARMING
4.0 - GARAGE FUNCTION
workshop for maintenance or repais or if the TAG CARD is not working
.
pause.
.
by inserting the electronic key in
.
USER MANUAL - PAGE 03
Advertisement
