Control Box Operation - Promatic Huntsman Set Up And Operating Instructions Manual

Promatic, Inc.
Arms and disarms the traps and controls their vertical and hori-
Before loading targets or performing maintenance, please en-
Dis-Arm Nudge
Arm / Load Toggles
(underlined in red)
Although not marked
with a label, the center
position of the Dis-Arm
Nudge -Arm/Load toggle
is the OFF position.
DIS-ARM NUDGE / ARM/LOAD TOGGLE
In the Arm/Load (down) position, a target loads onto the throw-
•
ing plate and the arm is cocked, ready for release.
Use the Off and Dis-arm/Nudge positions to DISARM the trap.
•
IMPORTANT: TO DISARM THE TRAP:
Off (center) position then on up to the Dis-Arm Nudge (up) position.
Hold the toggle until the target is thrown, then release it.
After the target is thrown the machine is disarmed (throwing arm is
pointing in the 8:00 clock position). The toggle returns to the Off
(center) position after disarming the trap.
TO FULLY DISARM THE TRAP, YOU SHOULD ALSO SET THE SWITCHES
ON THE BREAKER BOX TO OFF (THE RED ON THE SWITCH IS VISIBLE).
888.767.2529

CONTROL BOX OPERATION

zontal movements.
sure traps are DISARMED.
Controls the Throwing Arm
Push the arming toggle to the
Page 3