Promatic Huntsman Set Up And Operating Instructions Manual page 2

This is an automatic machine. Targets may be released at any time.
Failure to read and understand these instructions before using this ma-
chine can result in death, bodily injury or property damage.
Read these instructions completely to insure the traps are DISARMED
properly before loading targets or performing maintenance. If you have
any questions after reading this manual, call Promatic for assistance.
Traps should be DISARMED when the unit is not in use.
Position your body and all body parts behind the unit (tongue end of
the trailer). Never stand in front of or to the sides of the unit.
SEE PAGE 3 FOR INSTRUCTIONS TO DISARM THE TRAPS
ALWAYS USE TRAVEL BOLT WHEN MOVING TRAILER
When moving the trailer, re-insert the travel bolt into the center trap.
The bolt secures the center trap for travel and is required to
Always remove the travel bolt before operation. Failure to do so will
Breaker Box Control Box
Controls power to the 3 Arms and disarms the
traps and the oscillation
traps and controls their
motors. The traps will not
vertical and horizontal
fire when they have been
movements.
disarmed and the
switches on this box are NOTE: The Center Trap
in the "off" position (the
Elevation button is only
red on the switch is
present on the Huntsman
visible).
Wobble Control Box.
Page 2 To Order Call: 1.888.767.2529
CAUTION
prevent damage to the unit.
result in damage to the unit.
Mounted Receiver
Receives signals from the
wireless transmitter to
control traps & flush
sequences.
Wireless Transmitter
Controls firing of the
traps and starts and stops
the flush sequence.
Uses (4) AA Batteries