Table of Contents
Advertisement
Serving the Clay Shooting Industry
Since 1985
Huntsman &
Huntsman Wobble
Game Trailer
Setup and Operating Instructions
Failure to read and understand these instruc-
tions before using this Clay Target Launcher
can result in death, bodily injury or property
damage.
If you have any questions regarding setup or
operation after reading this manual, call
Promatic for assistance at 888.767.2529 be-
fore proceeding.
Advertisement
Table of Contents
Summary of Contents for Promatic Huntsman
- Page 1 Failure to read and understand these instruc- tions before using this Clay Target Launcher can result in death, bodily injury or property damage. If you have any questions regarding setup or operation after reading this manual, call Promatic for assistance at 888.767.2529 be- fore proceeding.
- Page 2 Read these instructions completely to insure the traps are DISARMED properly before loading targets or performing maintenance. If you have any questions after reading this manual, call Promatic for assistance. Traps should be DISARMED when the unit is not in use.
-
Page 3: Control Box Operation
Promatic, Inc. 888.767.2529 Page 3 CONTROL BOX OPERATION Arms and disarms the traps and controls their vertical and hori- zontal movements. Before loading targets or performing maintenance, please en- sure traps are DISARMED. Dis-Arm Nudge Arm / Load Toggles (underlined in red) - Page 4 Promatic, Inc. 888.767.2529 Page 4 Test / Fire Toggles (underlined in red) Left & Right Trap Rotation Toggle (underlined in blue) TEST / FIRE TOGGLE Push this toggle to fire a target from the machine. LEFT & RIGHT TRAP ROTATION NUDGE / RUN TOGGLE Controls movement of the Left, Right and Center traps.
- Page 5 Promatic, Inc. 888.767.2529 Page 5 Nudge / Run Toggles (underlined in red) CENTER TRAP ELEVATION & ROTATION NUDGE / RUN TOGGLES Controls the rotation (side to side) movement of the center trap. In the Run (down) position, the trap will move in a continuous •...
-
Page 6: Quick Start Instructions
Promatic, Inc. 888.767.2529 Page 6 WIRELESS TRANSMITTER OPERATION Before loading targets or performing maintenance, please ensure traps are DISARMED. POWER / OK DISPLAY FIRE / FLUSH SELECTION MODE FIRE / FLUSH SELECTION INCREASE FLUSH SPEED FIRE / FLUSH SELECTION DECREASE FLUSH SPEED FIRE TRAP 1, 2 &... - Page 7 Promatic, Inc. 888.767.2529 Page 7 WIRELESS TRANSMITTER OPERATION Before loading targets or performing maintenance, please ensure traps are DISARMED. POWER / OK PRESS TO POWER UNIT ON PRESS & HOLD TO POWER UNIT OFF (In Flush Mode, first Pause the Flush then press MODE until Solo Delay displays, then Press &...
-
Page 8: Warranty
Unscrew 2 screws on battery compartment lid (situated at • top of unit). Replace 4 x AA Cells, Refit lid and boot. • WARRANTY The Huntsman and Huntsman Wobble are covered by a 3 year parts warranty to the original purchaser of the machine. -
Page 9: Routine Maintenance
Promatic, Inc. 888.767.2529 Page 9 ROUTINE MAINTENANCE ALWAYS DISARM MACHINE AND DISCONNECT BATTERY BEFORE MAKING ADJUSTMENTS. Position your body and all body parts behind the unit. Never ap- proach from the front, stand in front or to the sides of the unit. - Page 10 Promatic, Inc. 888.767.2529 Page 10 NOTES...
- Page 11 Promatic, Inc. 888.767.2529 Page 11 This page intentionally left blank.
-
Page 12: Sales And Service
Serving the Clay Shooting Industry Since 1985 SALES and SERVICE For any questions or help regarding the setup or operation of this Promatic machine, please contact Promatic directly on one of the numbers listed be- low. SALES & SERVICE: 888.767.2529 EMAIL: Info@promatic.biz...
Need help?
Do you have a question about the Huntsman and is the answer not in the manual?
Questions and answers