Table of Contents
Advertisement
10. Slide the unit into the cabinet.(See Fig. 7)
CAUTION: For security purpose, reinstall
screws(Type A) at cabinet's sides.
11. Cut the foam-strip
and insert between the upper window sash
and the lower window sash.
(See Fig. 8)
12. Attach the window locking bracket
type C screw. (See Fig. 9)
13. Attach the front grille to the cabinet by insert-
ing the tabs on the grille into the tabs on the
front of the cabinet. Push the grille in until it
snaps into place.(See Fig.10)
14. Lift the inlet grille and secure it with a type A
screw through the front grille.(See Fig. 11)
to the proper length
with a
Screw(Type A)
Fig. 10
- 10 -
Power cord
Fig. 7
Screw(Type A)
Foam-Strip
Fig. 8
Window locking bracket
13
Fig. 9
Fig. 11
Fig. 12
8
Advertisement
Table of Contents
