For Your Safety Drain Assembly - Blodgett XCEL-50EC Installation & Operation Manual

DRAIN ASSEMBLY
1. Smear the threads of the drain pipe with pipe dope.
2. Install the drain pipe using a pipe wrench. Be sure to
align the actuator mounting bracket with the side of
the oven.
3. Hang the drain cap assembly ring over the actuator
mounting bracket. The drain cap assembly is used to
cover the drain if the drain hose cannot be left con-
nected.
Figure 6
4. Remove the screws holding the cover onto the drain
actuator.
5. Remove the hardware bag shipped inside the drain
actuator.
Actuator
Mounting
Bracket
Side of
Oven
6. Remove the actuator tab bracket holding the actuator
arm.
7. Loosen the two set screw holding the bracket on the
back of the drain actuator.
7
Installation
Oven Assembly
Figure 7
Figure 8