Advertisement
Alarm
Selecting different play modes:
REPEAT and SHUFFLE
(See 5
)
You can select and change the various play
modes before or during playback, and
combine REPEAT modes with program.
– plays all tracks in random order.
SHUFFLE
– plays the current track
REPEAT
continuously.
– plays the entire disc/
REPEAT ALL
program continuously.
– plays the entire
SHUFFLE REPEAT ALL
disc/program continuously in random order.
1 To select play modes, press SHUF/REP
once or more.
➜ The selected play mode will be displayed.
2 Press ); to start playback if in the stop
postion.
➜ When SHUFFLE mode is selected, the
disc will play automatically around few
seconds later.
3 To return to normal playback, press
SHUF/REP repeatedly until the various
modes are no longer displayed.
– You can also press 9 once to cancel your
play modes.
Notes:
– During playback, when shuffle mode is
selected, shuffle play will begin only when
playback of current track comes to an end.
– Selection of shuffle mode is not available in
the program mode.
Sleep
Connecting an external device
You can listen to the sound of the connected
external device through your AJ3915's
speakers.
1 Press POWER to switch on from standby.
2 Use the supplied line-in cable to connect
AJ3915's AUX jack to an AUDIO OUT or
headphone jack on an external equipment
(such as CD player, or VCR).
➜ " AU" is displayed.
➜ AUX mode will auto switch on to play the
sound, overriding the active CD or
RADIO mode.
Using the alarm
AJ3915 allows you to simultaneously set two
different alarms (ALARM 1 and ALARM 2 )
which can go off in the CD, radio or buzzer
mode.The clock time needs to be set
correctly before using alarm.
Setting alarm time
1 Press and hold ALARM 1 or ALARM 2
until clock digit(s) for hour flashes.
➜ ALM1 or ALM2 is also displayed, flashing.
➜ It will exit the clock setting mode without
setting if there is 5-second inactivity.
2 Press repeatedly, or hold down ∞/ § to
adjust the hours.
3 Press corresponding ALARM 1 or
ALARM 2 to confirm the hour setting.
➜ The clock digits for minute flash.
4 Press repeatedly, or hold down ∞ / § to
adjust the minutes.
5 Press corresponding ALARM 1 or
ALARM 2 to confirm the setting.
•
When CD•RADIO•BUZZER is pushed in
the CD position, selection of CD track
number will be also prompted. Press ∞ / §
to select desired track if you like.
•
Repeat the steps above to set and activate
the other alarm if necessary.
Safety and maintenance (See 7 )
➜ When alarm are/is set and activated.
ALM1 and/or ALM2 are/is displayed.
Selecting alarm mode
1 Press POWER to switch to standby.
2 Select your choice of alarm mode: either CD
radio, or buzzer by using the
CD•RADIO•BUZZER slider.
➜ When alarm are/is activated, ALM1 and/or
ALM2 are/is displayed (See 6).
At the set alarm time, the CD or radio or
•
buzzer will switch on automatically.
Notes:
– Insert a CD if you select CD source as
alarm mode. CD will play from the first
track, or the track you have selected during
the alarm setting. If a CD is not loaded,
buzzer will auto turn on.
– When AJ3915 is in AUX mode (connecting
an external device), only buzzer will turn on
at the set time regardless of the CD or
RADIO alarm mode you have selected.
– If you have an alarm set in the radio or CD
mode, make sure you have adjusted the
volume loud enough to wake you up.
Switching off the alarm
There are three ways of switching off the
alarm. Unless you choose to cancel the alarm
completely, the DAILY ALARM RESET option
will be automatically kept activated from the
time your alarm first goes off.
Daily alarm reset
If you want the alarm to be stopped
immediately but also wish to repeat the alarm
call at the same time for the following day:
1 During the alarm call, press once
corresponding ALARM 1 or ALARM 2, or
press POWER.
➜ The corresponding ALM1 or ALM2 is still
displayed.
Repeat alarm
This will repeat your alarm call at 6-minute
intervals.
1 During the alarm call, press
REPEAT ALARM as indicated by the
arrow located at the top panel.
➜ The corresponding ALM1 or ALM2 is still
displayed, yet flashing.
Switching off the alarm completely
Press once or more corresponding
ALARM 1 or ALARM 2 until ALM1 or
ALM2 disappears.
Sleep
The CD clock radio has a built-in sleep timer,
which enables the set to be automatically
switched off during radio or CD playback
after a set period of time.
Setting the sleep time
1 Press POWER to switch to standby.
2 Set your timer by pressing repeatedly SLEEP
until the desired timer option appears.
➜ The set is auto switched on in the CD or
RADIO mode you have selected. And
"SLEEP" is displayed (See 6).
➜ Selections are follows (time in minute)
90=80=70=60=50=40=30=
20=10
3 The set will turn off automatically at the
selected time.
4 To cancel the timer function, either
press SLEEP once or more until "SLEEP"
disappears, or press POWER to switch to
standby.
➜ SLEEP disappears when sleep function is
cancelled.
Note:
– The sleep function does not affect your
alarm time setting(s).
Advertisement
