Securing To Wall And Wood Floor Or Permanent Shelf; Securing To Masonry Floor - Stack-On PFS-012-BG-E Owner's Manual

OWNER'S MANUAL
®
SELECTING A LOCATION AND SECURING THE SAFE (CONT.)
STEP 4
WALL STUD
WALL ANCHOR
LAG SCREWS
SECURING TO WALL AND WOOD
FLOOR OR PERMANENT SHELF:
NOTE: Position plastic wall anchor
in wall before placing safe in
mounting location.
Use plastic wall anchor to secure the
other back hole that is not centered
on a wall stud.
Position safe in mounting location.
Position lag screws through washers
and safe as shown in FIGURE 1.
WASHERS
FIGURE 1
Tighten screws using a socket wrench.

SECURING TO MASONRY FLOOR:

WALL ANCHOR
WALL STUD
Insert plastic wall anchors into
ANCHORS
pre-drilled holes in masonry as
shown in FIGURE 2.
Use a plastic wall anchor to secure the
other back hole that is not centered
on a wall stud.
Position safe in mounting location.
Position lag screws through washers
and safe as shown in FIGURE 1.
Tighten lag screws into masonry
anchors using a socket wrench.
FIGURE 2
PERSONAL FIREPROOF SAFES
PAGE 9 of 28 40721-1703