Cd Playback Feature; Step A: Plug To The Wall Outlet; Step B: Setting The Clock/Alarm Time; Step C: Selecting The Alarm Mode - Philips AJ3915/79 Quick Start

C
ALARM 1
ALARM 2
B
CLOCK
ENGLISH
Quick start as easy as ABC!
Step A
• Plug to the wall outlet.
Step B
Setting the Clock/Alarm time
1.
Press and hold CLOCK or ALARM 1/ ALARM 2 until clock digits for hour flash.
Press repeatedly, or hold down ∞/ § to adjust the hours.
2.
3.
Press CLOCK or ALARM 1/ ALARM 2 to confirm the hour setting, and the
clock digits for minute flash.
Press repeatedly, or hold down ∞ / § to adjust the minutes.
4.
5.
Press CLOCK or corresponding ALARM 1/ ALARM 2 to confirm the minute setting.
• Corresponding ALM1 or ALM2 is displayed when alarm time is set to activate.
Step C
Selecting the Alarm mode
1.
Press POWER to switch to standby.
2.
Select your choice of alarm mode: either CD, Radio, or Buzzer by using the
CD•RADIO•BUZZER slider.
• At the set alarm time, the CD or Radio or Buzzer will switch on automatically.
3

ways to switch off the alarm

• Press once corresponding ALARM 1 or ALARM 2, or press POWER (ALM1 or ALM2 is still
displayed.).
• Press REPEAT ALARM (ALM1 or ALM2 is still displayed, yet flashing.).
• Press repeatedly corresponding ALARM 1 or ALARM 2 until ALM1 or ALM2 disappears.

CD playback feature:

A
This CD clock radio can play only audio discs including CD-R (CD-recordable), CD-RW
(CD-rewritable).
1.
Press POWER to switch on from standby.
2.
Select CD source by pushing CD•RADIO•BUZZER to CD.
3.
Lift the CD door to open.
4.
Insert a CD with printed side facing up, and close the CD door.
Press ); to start playback.
5.
To stop playback, press 9.
6.