Table of Contents
Advertisement
CLOCK MEMORY BACKUP
The clock memory backup allows your alarm and clock time settings to be
stored for up to a day when there is a power interruption e.g. power fail-
ure. The complete clock radio and display illumination will be switched off.
As soon as the power supply returns, the display will indicate the correct
time.
1 Remove the battery door to insert a 9 volts 6F22 type battery (not
included) for backup.
2 Close the battery door.
NOTE: If no backup battery is installed or the power interruption is prolonged,
you will need to set the clock and alarm times again.
Batteries contain chemical substances so they should be disposed of
properly.
Standby power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2W
RADIO
You can use this set solely as a radio!
1 Adjust OFF/ ON/ AUTO/ BUZZ to ON to switch on the radio.
2 Select your waveband by adjusting the FM/MW switch.
3 Adjust TUNING to tune to your desired station.
4 Turn the VOLUME control to adjust the volume level.
5 Adjust OFF/ ON/ AUTO/ BUZZ to OFF to switch off the radio.
To improve reception:
FM:
Extend and position the pigtail fully to obtain optimal reception.
MW:
uses a built-in antenna inside the set. Direct the antenna by
adjusting the position of your set.
Advertisement
Table of Contents
