Advertisement
Section 2
Replace Seatback Tilt Lever
Step 1
Step 1
Let the fabric flap drop into place, stretching
the fabric to make sure the seatback tilt
lever shaft protrudes through the hole in the
flap.
Repeat this procedure for the passenger
seat.
Note: Passenger side lever is different on
2-door vehicles.
P6 - 29283 - Rev. D 1115
2-Door
Passenger side shown
Installation Instructions - Seat Covers, Front Kit
Step 2
Step 2
Push the fabric back to expose the groove on
the shaft if necessary, and with the retaining clip
in the locked position on the seatback tilt lever,
slide the lever onto the shaft on the seat until
the retaining clip snaps into place.
Give the lever a tug once the clip has snapped
into place to make sure that the lever is secure
on the shaft.
Repeat this procedure for the passenger seat.
Page 6
© 2015 Bestop, Inc.
Advertisement
