Advertisement
Quick Links
Installation Instructions
Seat Covers, Front Kit
Installation Tips
Read and follow, precisely, all installation instructions provided when
installing this product. Failure to do so may result in a poor fit, and could
place occupants of the vehicle in a potentially dangerous situation.
WARNING
To reduce the risk of accidental injury: Follow all vehicle Manufacturer's and Bestop®
safety messages, application and installation instructions.
• Do not remove seats from the vehicle to install this product.
• Fit and maintain sides of seat cover as tight to seat as possible, always
matching front to side seam of seat with similar panels and seams of seat cover.
• Remove headrest carefully to avoid damaging manufacturer's wiring.
Assure all plugs are connected after installation of seat cover.
• Do not use and replace if seat cover becomes damaged or wear no longer allows
tight fit to seat sides.
Tools
Safety Glasses
P1 - 29283 - Rev. D 1115
Installation Time
Skill Level
3 - Moderately Difficult
Installation Instructions - Seat Covers, Front Kit
We're here to help!
2 Hours
Go to www.Bestop.com and
Vehicle Application:
Wrangler 2DR, Wrangler Unlimited
2013- 2017
Part Number 29283
Support
click "Contact Us"
See a video showing
installation of this product at:
www.bestop.com/video
© 2015 Bestop, Inc.
Advertisement
Related Manuals for Bestop 29283
Summary of Contents for Bestop 29283
-
Page 1: Installation Instructions
WARNING To reduce the risk of accidental injury: Follow all vehicle Manufacturer’s and Bestop® safety messages, application and installation instructions. • Do not remove seats from the vehicle to install this product. -
Page 2: Parts List
Seat Bottom Covers Page 8 Seat Bottom Elastic Cord S-hooks Qty. 2 Driver-Side Passenger-Side Seat-Bottom Cover Seat-Bottom Cover Qty. 1 Qty. 1 P2 - 29283 - Rev. D 1115 © 2015 Bestop, Inc. Installation Instructions - Seat Covers, Front Kit... - Page 3 Adjust the seams for a smoother appearance. Repeat this procedure for the passenger side seat. Set headrests aside - do not reinstall at this time. P3 - 29283 - Rev. D 1115 © 2015 Bestop, Inc. Installation Instructions - Seat Covers, Front Kit...
- Page 4 4-door vehicles. WARNING to preserve airbag functionality, you MUST remove the seatback tilt levers before placing the seat covers over the seats. P4 - 29283 - Rev. D 1115 © 2015 Bestop, Inc. Installation Instructions - Seat Covers, Front Kit...
- Page 5 Make sure that the Side Airbag tag is nearest the vehicle door. passenger seat covers. Repeat this procedure on the passenger seat. P5 - 29283 - Rev. D 1115 © 2015 Bestop, Inc. Installation Instructions - Seat Covers, Front Kit...
- Page 6 Note: Passenger side lever is different on on the shaft. 2-door vehicles. Repeat this procedure for the passenger seat. P6 - 29283 - Rev. D 1115 © 2015 Bestop, Inc. Installation Instructions - Seat Covers, Front Kit...
- Page 7 Repeat this procedure for the passenger Repeat this procedure for the passenger seat. seat. P7 - 29283 - Rev. D 1115 © 2015 Bestop, Inc. Installation Instructions - Seat Covers, Front Kit...
- Page 8 Make sure that the seat will tilt forward and back, and slide from front to back without the seat rail snagging the straps. P8 - 29283 - Rev. D 1115 © 2015 Bestop, Inc. Installation Instructions - Seat Covers, Front Kit...
- Page 9 Section 3 Page 9 Replace Headrests Step 1 Step 1 Replace the headrests on both the driver and passenger seats. P9 - 29283 - Rev. D 1115 © 2015 Bestop, Inc. Installation Instructions - Seat Covers, Front Kit...