Table of Contents
Advertisement
r1.3-10/3/14
EQUIPMENT SHOULD ALWAYS BE INSTALLED FROM THE BOTTOM OF THE RACK
FIRST AND WORK TOWARDS THE TOP OF THE RACK. INSTALLING EQUIPMENT AT
THE TOP OF THE RACK FIRST MAY INCREASE RISK OF TIPPING.
IF ENCLOSURE IS USED IN A STAND-ALONE APPLICATION, IT MUST BE INSTALLED
At least two persons are required to install or remove equipment or components which weigh more
than 50 lbs (22.5 kg).
o Always ensure proper fixing and safe placement of all components and rack elements.
o Whether installed as a stand-alone configuration or in a rack suite, Racks must always be closed
with appropriate side panels prior to commissioning.
o Caution in case of withdrawable components and component shelves
o To avoid injuries or material damage, the Rack must be stabilised appropriately before pulling
out any withdrawable components or component shelves.
o Always pull only one component or component shelf out at a time. The rack may become
unstable if several components are pulled out at once.
7510 Montevideo Road
Jessup, MD 20794
Tel (410)799-4200
WITH A BOLT-DOWN KIT.
User Installation Guide
IsoFlo™ and ContraFlo™
© 2014 Tate Access Floors, Inc.
5 of 18
Advertisement
Table of Contents
