Set The Sleep Timer; Adjust Display Brightness - Philips DC291/98 User Manual

Activate and deactivate the alarm
timer
1
Press ALM 1 or ALM 2 repeatedly to
activate or deactivate the timer.
» If the timer is activated, [
AL2] is displayed.
» If the timer is deactivated, [
or [ AL2] disappears.
Repeat alarm
1
When the alarm rings, press
BRIGHTNESS/REP ALM.
» The alarm repeats ringing minutes
later.
Tip
‡
You can press / to adjust the interval to repeat
alarm.
Stop alarm ring
1
When the alarm rings, press the
corresponding ALM 1 or ALM 2.
» The alarm stops but the alarm
settings remain.
View the alarm settings
1
Press ALM 1 or ALM 2.

Set the sleep timer

This unit can switch to standby automatically
after a set period of time.
1
Press SLEEP repeatedly to select a set
period of time (in minutes).
» When the sleep timer is activated,
the display shows
will gradually decrease in the last 5
minutes.
AL 1] or [
AL1]
, and the volume
To deactivate sleep timer
1
Press SLEEP repeatedly until [OFF] (off)
is displayed.
» When the sleep timer is deactivated,
disappears on the display.

Adjust display brightness

1
Press BRIGHTNESS/REP ALM
repeatedly to select different levels of
display brightness.
EN 15