Communication Level; Rf Parameters; Transmitting Power; Receiving Sensitivity - Ebyte E70 Series User Manual

CC1310 Wireless Module

2.2.5 Communication Level

Model Min
E70 (433T14S2)
E70 (433T14S)
E70 (433T30S)
E70 (868T14S2)
E70 (868T14S)
E70 (868T30S)
E70 (915T14S2)
E70 (915T14S)
E70 (915T30S)

2.3 RF Parameters

2.3.1 Transmitting Power

Model Min
E70 (433T14S2) 13.7
E70 (433T14S)
E70 (433T30S)
E70 (868T14S2) 13.7
E70 (868T14S)
E70 (868T30S)
E70 (915T14S2) 13.7
E70 (915T14S)
E70 (915T30S)

2.3.2 Receiving Sensitivity

Model
E70 (433T14S2) -106.0
E70 (433T14S) -109
E70 (433T30S) -109
E70 (868T14S2) -106.0
E70 (868T14S) -109
E70 (868T30S) -109
E70 (915T14S2) -106.0
E70 (915T14S) -109
E70 (915T30S) -109
Copyright ©2012–2017, Chengdu Ebyte Electronic Technology Co., Ltd.
Typ Max
2.1 3.3 3.8
2.1 3.3 3.8
2.1 3.3 3.8
2.1 3.3 3.8
2.1 3.3 3.8
2.1 3.3 3.8
2.1 3.3 3.8
2.1 3.3 3.8
2.1 3.3 3.8
Typ Max
14.0 14.6
13 14 15
29 30 31
14.0 14.6
13 14 15
29 30 31
14.0 14.6
13 14 15
29 30 31
Min Typ Max
-108.0 -110.0
-110 -110
-110 -110
-108.0 -110.0
-110 -110
-110 -110
-108.0 -110.0
-110 -110
-110 -110
Unit
V DC
V DC
V DC
● If the module stays at maximum communication level for a long time,
V DC
it may be damaged.
V DC
● Though there are may ways to switch communication level, but the
V DC
whole power consumption will be affected to a large extent.
V DC
V DC
V DC
Unit
● Due to the error of the materials, each LRC component has ± 0.1%
dBm
error, so error accumulation will occur since multiple LRC components
dBm
are used in the whole RF circuit, and the transmitting currents will be
dBm
different at different modules;
dBm
● The power consumption can be lowered by lowering the transmitting
dBm
power, but the efficiency of the internal PA will be decreased by
dBm
lowering transmitting power due to various reasons;
dBm
● The transmitting power will be lowered by lowering the power supply
dBm
voltage.
dBm
Unit
dBm
dBm
●
The sensitivity is tested at the air data rate of 2.5kbps.
dBm
● Due to the error of the materials, each LRC component has ±0.1%
dBm
error, so error accumulation will occur since multiple LRC components
dBm are used in the whole RF circuit, and the transmitting currents will be
different at different modules;
dBm
● The receiving sensitivity will be reduced and communication range
dBm
will be shortened while increasing the air data rate.
dBm
dBm
E70 Series User Manual
Remarks
Remarks
Remarks
8 / 34