Mechanical Characteristics; E70 (433T14S2)/ E70 (868T14S2)/ E70 (915T14S2); Dimension; Pin Definition - Ebyte E70 Series User Manual

CC1310 Wireless Module

3.Mechanical Characteristics

3.1 E70 (433T14S2)/ E70 (868T14S2)/ E70 (915T14S2)

3.1.1 Dimension

3.1.2 Pin Definition

No. Pin item
1、2、3 GND
4、5、6、7 NC
8 GND
9、10 GND
11 PA_EN
12 LNA_EN
13 M2
14 RESET
15 GND
16 AUX
Copyright ©2012–2017, Chengdu Ebyte Electronic Technology Co., Ltd.
Pin direction
Ground Ground electrode
Reserved pin Reserved, to be floated
Power positive reference,
Power supply 2.2V ~ 3.8V DC
Ground Ground electrode
Output Internal MCU controlled PA pin, valid in high level, （to be floated）
Output Internal MCU controlled LNA pin, valid in high level,（to be floated）
M2, M1, M0 together decide the 8 kinds of working modes;
Input
An external 1k protective resistor shall be connected in series when in use.
Input Reset pin, valid in low level
Ground Ground electrode
It is used to indicate the operation status of module, for user to wake up the external MCU,
the module outputs low level during self-checking and initialization at power on, it can be
Output
configured as open-drain output or pull-up output, please refer to parameter setting part. An
external 1k protective resistor shall be connected in series when in use. (can be floated)
E70 Series User Manual
Application
10 / 34