Connect Power; Set Time And Date; Turn On; Switch To Standby Mode - Philips DCB291/12 User Manual

Connect power

Caution
•
Risk of product damage! Ensure that the power
voltage corresponds to the voltage printed on the
back or underside of the unit.
•
Risk of electric shock! When you unplug the power
adapter, always pull the plug from the socket. Never
pull the cord.
•
Before connecting the power adapter, ensure that
you have completed all other connections.
•
Use the supplied power adapter only.
Note
•
The type plate is located on the bottom of the main
unit.
Connect the power adapter to:
• the DC IN socket at the back of the
unit.
• the wall socket.

Set time and date

1
In standby mode, press and hold SET
TIME for 2 seconds.
» [SYNC ON] is displayed and [ON]
begins to blink.
2
Press / or /
ON or OFF.
» [ON]: The unit synchronizes time
from the DAB+ station.
» [OFF]: The time synchronization with
DAB+ station is deactivated.
10 EN
repeatedly to select
3
Press SET TIME to confirm.
» [24H] or [12H] begins to blink.
4
Press / or /
hour format.
5
Press SET TIME to confirm.
»
The hour digits begin to blink.
6
Repeat steps 4-5 to set the hour, minute,
year, month, and day.
Note
•
If clock is not manually set, when iPod/iPhone/iPad
is connected, the unit synchronizes time from the
iPod/iPhone/iPad automatically.
Tip
•
The accuracy of the transmitted time depends on the
DAB+ station or the docked iPod/iPhone/iPad that
transmits the time signal.

Turn on

Press POWER.
»
The unit switches to the last selected
source.
Tip
•
To select a source, press SOURCE repeatedly or the
source selection buttons on the remote control.

Switch to standby mode

Press POWER again to switch the unit to
standby mode.
»
The time and date (if set) appear on
the display panel.
to select the 12/24