Play; Play From Ipod/Iphone/Ipad; Play From An External Device - Philips DCB291/12 User Manual

4 Play

Play from iPod/iPhone/iPad

You can enjoy audio from iPod/iPhone/iPad
through this unit.
Compatible iPod/iPhone/iPad
The unit supports the following iPod, iPhone
and iPad models:
Made for.
• iPod touch (1st, 2nd, 3rd, and 4th
generation)
• iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th
generation)
• iPod mini
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
• iPad
Listen to the iPod/iPhone/iPad
1
Place the iPod/iPhone/iPad into the dock.
2
Press DOCK on the remote control to
select iPod/iPhone/iPad source.
• To pause/resume play, press
.
• To skip to a track, press
• To search during play, press and
hold / , then release to resume
normal play.
• To go back to the previous iPod/
iPhone/iPad menu, press MENU.
• To scroll through the menu, press
/ .
• To confirm a selection, press
»
If no key is pressed for more than
10 seconds, OK/
the play/pause key.
Charge the iPod/iPhone/iPad
Note
•
iPod with color display, iPod classic, and iPod with
video are not compatible with dock charging.
When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge.
Tip
•
For certain iPod models, it may take up to a minute
before the charging indication appears.

Play from an external device

You can also listen to an external audio device
through this unit.
1
Press MP3 LINK to select the MP3 link
source.
2
Connect the supplied MP3 link cable to:
• the MP3 LINK socket (3.5mm) at
the back of this unit.
• the headphone socket of an external
device.
3
Start to play the device (see the user
manual of the device).
OK/
/ .
OK.
acts back as
EN 11