Transport And Storage; Transport Of The Pyrometer; Storage Of The Pyrometer - KLEIBER 217 R-LWL Operation Manual

9 Transport and Storage

9 Transport and Storage

9.1 Transport of the pyrometer

CAUTION:
Environmental factors, impacts and the formation of water condensation may damage some compo-
nents!
When transporting the pyrometer, take suitable measures to protect all components from environmen-
tal factors, impacts and the formation of water condensation! Temporary storage of the pyrometer in
the open air is not permitted!
Look at Taking out of service (section 11.1) at page 18 how to dismantle the pyrometer.
It is advisable to use the original packaging for the shipping of the pyrometer. If the original packaging is no
longer available, the pyrometer should be shipped in a cardboard box with shock-absorbing PE material.
When transporting the pyrometer observe the following instructions:
Take great care when transporting the pyrometer to avoid damage through the effect of force, or careless
loading or unloading.
Avoid jerks, vibrations and the formation of condensed water due to severe temperature deviations while
transporting.
In the case of overseas shipping, a suitable desiccator (e.g. silica gel) should be inserted and the pyrom-
eter should be sealed together with the desiccator in a protective plastic sheet.
If the pyrometer is not immediately installed after delivery and put into operation, then it should be carefully
stored in a location protected against dust and humidity (Storage of the pyrometer (section 9.2) at page
16).
The pyrometer is thus ready to be shipped.

9.2 Storage of the pyrometer

CAUTION:
Environmental factors, impacts and the formation of water condensation may damage some compo-
nents!
Store the pyrometer only in dry areas without large variations in temperature! The atmosphere should
be free of dust and corrosive vapors!
Store the pyrometer appropriately in the original packaging. Put a suitable desiccant inside the packing (e.g.
silica-gel) to prevent damage by moisture. Protect the pyrometer against dust through suitable measures.
The following climatic conditions are required in the storage room of the pyrometer:
temperature range -20 C to +70 C
maximum air humidity to 70 %
atmosphere free of dust and corrosive vapors
16 KLEIBER 217 R - LWL