Advertisement
Quick Links
Advertisement
Related Manuals for F.I.T. LED 2000
Summary of Contents for F.I.T. LED 2000
- Page 2 Content Specification Operation Instruction Warranty III. Ⅰ. Specification 1.1 Construction:...
-
Page 3: Specification
1.2 Specification Brightness White: 2000Lumen; Red: 100Lumen Light Beam White: 120degrees;Red:120degrees Battery 36250 Lithium-ion battery Using time White: more than 1 hour, Red: more than 100 hours Depth Rating 100m/330ft White: CREE XM-L T6*4PCSColor temperature: LED spec 5700K~6500K Red: CREE XP-E R2*1PCS (Red, 620nm) LED Life Over 50000 hours Materials... - Page 4 warning, Low battery capacity protection, Temperature protection. Special function Battery reversal protection 1.3 Package Ⅱ. Operation 2.I Assembly for the battery 2.1.1 Anticlockwise unscrew the rear cap of the video. 2.1.2 Insert 1pc of 36250 Lithium-ion battery into the rear cap, and note the positive and negative terminals (Chart 4).
-
Page 5: Temperature Protection
leaking. 2.2 Turn On / Off Video Light 2.2.1 Turn on: Clockwise unscrew the rear of the video tightly, press the button on the light head, the light will be turned on (White is the default). 2.2.2 Turn off: Press the button on the light head for 2 seconds up, the light will be turned off. - Page 6 2.5 Capacity Status Indicate There are 4 level for capacity status, the green means the full capacity; the yellow means a half of full capacity; the red means the low capacity; if the red is flickering, which indicates the capacity will run out soon, and the light will be turned off automatically ten minutes later.
-
Page 7: Quality Warranty
2.7.2 Then insert the charger into power socket when everything is ok, and will start charging when the indicator turns red. 2.7.3 The indicator will turn green once the charge is completing. 2.8 Silicone grease Usage. If it is hard to switch the rear cap or the O-ring of the rear is dried-up after a long time use, please daub appropriate silicone grease. - Page 8 Followings are excluded: 1. Refitted, broken and disassembled product. Defective product occurred by misoperation. 3. The battery is leaking. Other human irresistible factors (like geological disaster, wars) Solution Please try following solutions when malfunction occurs. Malfunction Solution Check the positive and negative terminal. LED Light doesn't burn Check the capacity Check the tightness of the rear cap...