or is displayed if alarm timer is on
»
and disappears if it is off.
• To stop the ringing alarm, press the
corresponding AL1/AL2.
» The alarm repeats ringing for the next
day.
Snooze alarm
When alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing 9
minutes later.
Set sleep timer
This clock radio can switch to standby mode
automatically after a preset period.
Press SLEEP repeatedly to select the sleep
timer period (in minutes).
» When the sleep timer is activated,
To deactivate the sleep timer, press SLEEP
repeatedly until clock time appears.
Play from an external device
You can also listen to an external audio device
through this clock radio.
1
Press SOURCE to select the AUX source.
2
Connect the MP3 link cable (not supplied) to:
• the MP3-LINK socket (3 5mm) at the
back of your clock radio.
• the headphone socket of an external
device.
3
Start to play the device (see the user
manual of the device).
Adjust display brightness
Press BRIGHTNESS repeatedly to select
different brightness levels.
EN
11
7 Product
•
Product information is subject to change without prior
notice.
Specifications
Amplifier
Rated Output Power
Frequency Response
Signal to Noise Ratio
appears.
Total Harmonic Distortion
Aux Input (MP3 link)
Tuner (FM)
Tuning range
Tuning grid
Sensitivity
- Mono, 26 dB S/N Ratio
- Stereo, 46 dB S/N Ratio
Search Selectivity
Speakers
Speaker Impedance
Sensitivity
information
Note
2 x 5 W RMS
40-20000 Hz
>70 dB
<1%
0.6 V RMS 10 k
ohm
87.5-108 MHz
50 KHz
<22 dBf
<46 dBf
30 dBf
4 ohm
>82 dB/m/W