Using Bvms Config Wizard - Bosch DIVAR IP all?in?one 5000 Series Installation Manual

DIVAR IP all-in-one 5000
1.
2.
3.
4.
5.
4.6

Using BVMS Config Wizard

Intended use for Config Wizard is the quick and easy
configuration of a smaller system. Config Wizard helps you to
achieve a configured system including VRM, iSCSI system,
cameras, recording profiles and user groups.
User groups and their permissions are configured automatically.
You can add or remove users and set passwords.
Config Wizard can access Management Server only on the local
computer.
You can save an activated configuration for backup purposes
and import this configuration later. You can change this
imported configuration after import.
Config Wizard adds the local VRM automatically.
Restrictions:
The following tasks cannot be done with the Config Wizard. Use
BVMS Configuration Client instead.
–
–
–
–
–
Bosch Security Systems B.V.
On the BVMS default screen, press CTRL+ALT+DEL.
Hold SHIFT, click Switch User and keep SHIFT pressed for
about five seconds.
Enter administrator user name and password.
On the Desktop, in the Tools folder, right-click the
Disable_BVMS_and_VRM script, and then click Run as
administrator.
Add the system as an iSCSI storage expansion to an
external BVMS or VRM server using BVMS Configuration
Client or Configuration Manager.
adjusting schedules
configuring systems with no or multiple
Video Recording Manager
configuring external storage devices
adding Video Streaming Gateway
all advanced configurations beyond a basic setup (maps or
alarms, for example)
System setup | en
2019.08 | V1 | DOC
25