Bosch DIVAR IP all?in?one 5000 Series Installation Manual page 23

DIVAR IP all-in-one 5000
4.
5.
6.
7.
8.
9.
Notice!
In case of password loss a system recovery must be performed
as described in the installation manual. The configuration must
be done from scratch or must be imported.
Notice!
We strongly recommend not changing any operating system
settings. Changing operating system settings can result in
malfunctioning of the system.
Bosch Security Systems B.V.
In the Country or region, Time and currency and Keyboard
layout lists, click the appropriate item, then click Next.
The Microsoft Software License Terms and the EULA (End
User License Agreement) are displayed.
Accept the license terms, then click Start. Windows
restarts.
After restart is finished, press CTR+ALT+DELETE. The
Windows logon page is displayed.
Enter the default password WSS4Bosch.
After entering the password, a message is displayed that
you must change the password before logging on the first
time. To confirm, click OK.
Change the password.
A series of scripts perform important setup tasks. This can
take several minutes. Do not turn off the computer.
The BVMS default screen is displayed.
You can now decide in which mode you want to operate the
system:
– Operating as full video recording and management
system, page 24
– Operating as pure video recording system, page 24
– Operating as iSCSI storage expansion, page 24
System setup | en
2019.08 | V1 | DOC
23