Installation - Turbo Air PRO Series Installation And Operation Manual

Heated cabinets
Table of Contents

Advertisement

NOTICE TO CUSTOMER
Loss or spoilage of products in your heated cabinet is not covered by warranty.
In addition to following recommended installation procedures, you must run the
heated cabinet 24 hours prior to usage.

INSTALLATION

1. LOCATION - Allow adequate space and install the heated cabinet on a firm and level
floor. If the appliance is not level, there may be unusual noises and poor performance.
2. PLACE ON STRONG FLOOR - Be sure that the floor on which the unit is to be
installed is strong enough to support the total weight of the cabinet and any other
contents, before starting the installation.
3. INDOOR USAGE ONLY
wet from the rain. Do not install the heated cabinet in locations where the temperature
is over 110°F (43°C) or below 50°F (10°C ).
4. STABILIZING - Make sure the unit is installed in a stable condition with the front
wheels locked while in use.
5. LEVELING - Be sure that the unit levels from the front to the back and side to side.
6. UNIT SHOULD BE ON DEDICATED OUTLET - Plug the heated cabinet into a wall
socket exclusively for this appliance. Do not run on extension cord.
7. THE ELECTRICAL PLUG MUST BE ACCESSIBLE WITHOUT MOVING THE UNIT.
-
Be sure to install this unit indoors only to prevent getting
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents