Operating A Specific Monitor With The Remote Commander - Sony TRINITRON PVM-2950QM Service Manual

Operating a specific monitor with the remote commander
By following procedure, you can operate a specific
monitor with the remote commander without affecting
other monitors that are installed together.
1
Press ID MODE ON on the remote commander.
Monitor index numbers appear in white characters
on all the monitors. (Every monitor has its own
index number from 1 to 255 as factory preset.)
INDEX NO. :117
SET
D
2
Input the index number of the monitor you
want to operate using O - 9 buttons of the
remote commander.
The input number appears right next to each
monitor's own index number.
000
00©
000
®
3
Press ID MODE SET.
INDEX NO.: 117 117
The ch,ir,icler on the selected monitor changes to
cyan while others change to red.
ID MODE
ON
D
OFF
D
Now you can operate only a specified monitor. (All
operations available in ID mode except POWER
ON/OFF.)
10
4 After necessary adjustment, press ID MODE OFF.
The monitor returns to the normal mode.
ID MODE
ON
D
To change the index number
You can change the index number if necessary.
Yl>ll cannot change the number with the remote
commander. Use the keys on the monitor.
1
Display MENU 4 screen with pressing the MENU
button.
2
Select INDEX NO. and press ENTER.
3
Select the index number with the SELECT+/- buttons
and press ENTER.
-12-