1. Place the sensor in a desired open area. The place
must be within 50 meters away from the main unit.
(Make sure that the sensor is loaded with 2 AA
batteries.)
• For the first time using the outdoor sensor and
the main unit, press RESET located on the sensor
back, and RESET located in the battery
compartment of the main unit. Then, the main unit
will begin to receive transmission from the sensor.
• To update the outdoor temperature from the
sensor any time, press and hold
AUTO SCAN/DATE for 5 seconds.
Note:
– Refer to the supplied user manual for more
information about the outdoor sensor.
Printed in China
PDCC-JH-0710