Installation - vds TOM Technical Installation Manual

Predispose a trunking in corrispondence to the holes.
Ÿ Predispose a trunking in
corrispondence to the holes.
Ÿ Bend the brackets
Ÿ Make an excavation
Ÿ Insert the trunking.
Ÿ Level and cement the fixing plate
Open the front cover, remove the
casing from the motor by unscrewing
the screws present in the lower part of
the casing.
Place the motor on the fixing plate and
screw with the m12 nuts supplied.

INSTALLATION

Brackets
Screws for fix casing
Nuts
Fixing plate
Fig. 1
Cables
holes
Nuts
Fig. 2