Samsung MIM-H04UN User & Installation Manual page 7

3.
communication cables (F1, F2) to the terminals on the back of the front cover while adjusting to a suitable
length.
4.
• You can connect up to 16 indoor units to a Wi-Fi Kit.
NOTE
[Unit : mm (inch)]
10 (0.4) and over
10 (0.4) and over
10 (0.4)
and over
50 (2) and over
Back over
Be sure to secure space of at least
10 mm (0.4 inch) (up/right/left)
and 50 mm (2 inch) (down)
around the back cover before
Item
Power/communication terminals
Tracking/Reset button
Micro SD card slot
5. Assemble the Wi-Fi Kit again.
•
sure that there is no gap between the covers.
NOTE
Screw
holes
Fix the screws to the
screw holes.
Contents
Do not over-tighten the PCB
terminal.
Item Contents
LED
Interface module PBA
Indoor unit
Wi-Fi Kit
ⓐ
PCB port
7