DeWalt DCD708 Original Instructions Manual

DeWalt DCD708 Original Instructions Manual

Hide thumbs Also See for DCD708:

Advertisement

DCD708
DCD709
Final page size: A5 (148mm x 210mm)

Advertisement

Table of Contents
loading

Summary of Contents for DeWalt DCD708

  • Page 1 DCD708 DCD709 Final page size: A5 (148mm x 210mm)
  • Page 2 English (original instructions) Copyright D WALT...
  • Page 3 Fig. A Fig. B...
  • Page 4 Fig. C Fig. D Fig. E...
  • Page 5: Technical Data

    English CORDLESS COMPACT 13 mm DRILL/DRIVER/HAMMERDRILL DCD708, DCD709 Congratulations! may differ. This may significantly increase the exposure level over the total working period. You have chosen a D WALT tool. Years of experience, thorough An estimation of the level of exposure to vibration should...
  • Page 6: Electrical Safety

    Weight English Batteries Chargers/Charge Times (Minutes) Weight (kg) DCB107 DCB112 DCB113 DCB115 DCB118 DCB132 DCB119 Cat # DCB546 18/54 6.0/2.0 1.05 DCB547 18/54 9.0/3.0 1.46 DCB548 18/54 12.0/4.0 1.44 DCB181 0.35 DCB182 0.61 DCB183/B 0.40 DCB184/B 0.62 DCB185 0.35 DCB187 0.54 DCB189 0.54...
  • Page 7: Safety Instructions For All Operations

    English g ) If devices are provided for the connection of dust Shorting the battery terminals together may cause burns extraction and collection facilities, ensure these are or a fire. connected and properly used. Use of dust collection d ) Under abusive conditions, liquid may be ejected can reduce dust-related hazards.
  • Page 8: Residual Risks

    English hand or against your body is unstable and may lead to loss • Connect the brown lead to the live terminal in the plug. of control. • Connect the blue lead to the neutral terminal. • Accessories and tool may get hot during operation. Wear WARNING: No connection is to be made to the gloves when handling them if performing heat producing earth terminal.
  • Page 9: Charger Operation

    English Do not use an extension cord unless it is absolutely * The red light will continue to blink, but a yellow indicator light • necessary. Use of improper extension cord could result in risk will be illuminated during this operation. Once the battery pack of fire,electric shock, or electrocution.
  • Page 10: Important Safety Instructions For All Battery Packs

    English Battery Packs or falling hazard. Some tools with large battery packs will stand upright on the battery pack but may be easily Important Safety Instructions for All Battery knocked over. Packs Transportation When ordering replacement battery packs, be sure to include WARNING: Fire hazard.
  • Page 11: Package Contents

    Battery Type 1. The best storage place is one that is cool and dry away The DCD708/DCD709 operates on an 18 volt battery pack. from direct sunlight and excess heat or cold. For optimum battery performance and life, store battery packs at room These battery packs may be used: DCB181, DCB182, DCB183, temperature when not in use.
  • Page 12: Intended Use

    English Description (Fig. A) To Remove the Battery Pack from the Tool 1. Press the release button   2  and firmly pull the battery pack WARNING: Never modify the power tool or any part of it. out of the tool handle. Damage or personal injury could result. 2.
  • Page 13 English 2. Grasp the black sleeve of the chuck with one hand • To select reverse, depress the forward/reverse control and use the other hand to secure the tool. Rotate the button on the left side of the tool. sleeve counterclockwise far enough to accept the nOTE: The centre position of the control button locks the tool desired accessory.
  • Page 14 English Screwdriving DCD709 Only iMPORTAnT: Use carbide-tipped or masonry bits rated for Your tool has a clutch with adjustable torque for driving percussion drilling only. and removing a wide array of fastener shapes and sizes. The numbers on the mode selection collar   6 ...
  • Page 15: Optional Accessories

    English Optional Accessories WARNING: Since accessories, other than those offered by D WALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only D WALT recommended accessories should be used with this product.
  • Page 18 Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België en Luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)

This manual is also suitable for:

Dcd709

Table of Contents