Yamaha YZF1000 YZF-R1 Owner's Manual page 35

MODE-D: street use or rainy weather
To change YRC modes or make set-
ting changes
1. Push the mode switch center but-
ton to scroll left to right and high-
light the item you want to adjust.
1
1. Mode switch "MODE"
2. Up button
3. Center button
4. Down button
2. Use the mode switch up button or
down button to change the select-
ed item value (vertical scrolling is
not possible).
TIP
 When the malfunction indicator
light is on, YRC settings cannot be
adjusted.
 When a YRC function is actively
engaged that item cannot be ad-
justed. For example, when decel-
erating EBM cannot be adjusted.
2
 When a YRC item is highlighted
but cannot be adjusted, the YRC
3
item box will return to black.
4
LCS QS LIF
1000 r/min
12 34
01
LAP
123 123
km/h km/h
A 1
MODE- PWR
To turn off the traction control system,
select TCS with the center button, then
push and hold the up button until TCS
OFF is displayed. To turn TCS back on,
select TCS OFF and then press the
down button (TCS will return to its pre-
vious setting).
Instrument and control functions
10 : 00
2 MODE - A GPS MODE - A
GEAR
LATEST
12 N
ODO 123456
km
3 2 1
TCS SCS EBM T-2
4-12
TIP
Turning off the traction control system
will turn off the SCS, LCS, and LIF sys-
tems for all YRC modes.
YRC items LCS/QS/LIF/BC
The on/off status of YRC items LCS,
QSS, LIF, and BC is shown here. When
any of these systems are registered
(not set to OFF) for the currently select-
ed YRC mode, its respective icon will
appear.
When LCS is registered for the current-
ly selected YRC mode, its icon will be
grey. To activate the launch control
system, press and hold the center but-
ton until the LCS icon stops flashing
and turns white.
TIP
LCS, QSS, LIF, and BC system setting
levels can only be adjusted from the
MENU screen.
ERS indicator " " (YZF-R1M)
This icon shows the current ERS
mode. (See "YRC Setting" on page
4-16 and "ERS" on page 4-19 to
4