Toro Ultra Sonic Boom 130-8227 Installation Instructions Manual page 5

Installing the Wire Harness to the
Fuse Block
1. Route the wire harness under the seat
6).
1. Wire harness
2. Install the kit fuse block to the machine fuse
block (Figure 7).
1. Fuse block—machine
3. Install the power circuit by attaching the
connectors for the machine fuse block and the
kit fuse block (Figure
(Figure
Figure 6
2. Front of the machine
Figure 7
2. Fuse block—ultra sonic
boom finishing kit
8).
1. Connector—ultra sonic
boom finishing kit
g210299
Installing the Wire Harness to the
Terminal Block
Connect the ground wire to the terminal block
9).
g208927
1. Terminal block
5
Figure 8
2. Connector—machine
Figure 9
2. Ground wire—ultra sonic
boom finishing kit wire
harness
g210250
(Figure
g208928