Toro Ultra Sonic Boom 130-8227 Installation Instructions Manual page 4

Routing the Wire Harness to the Front of the Machine
Route the wire harness from the rear of the machine to the console as shown in
1. Wire harness
Installing the Switches
1. Route the 8-socket connectors through the
console (Figure 5).
2. Install the ultra sonic-mode switch and the
boom-lift switches; refer to the Installation
Instructions for the ultra sonic boom leveling kit.
Figure 4
1. 8-socket connector—ultra
sonic-mode switch
4
Figure 4.
Figure 5
2. 8–socket
connector—boom-lift
switch
g208589
g210252