Table of Contents
Advertisement
8.EPG Menu(Electronic Progra
The EPG (Electronic Program Guide) Menu provides
you with detailed broadcast program information.
Press the GUIDE Button and a pop-up Menu will
be displayed with
program information about the channel you are
currently watching. You will be able to see up to
seven days of program information. To view the
next day or more use the
the date and then press the
through the available dates.
The EPG menu is used to look at what is being
broadcasted on DTV or Radio channel in a day .
To access the EPG menu, press the GUIDE button
following menu will be displayed:
9.Record the progra :
9.1Press the remote control red key ,you can set the
program to be recorded.
9.2 To record the program you are currently watching
press the REC Button and a red REC icon will appear
on the screen.
The record time/ length and remaining record time will
be displayed in the menu below.
9.3
To reveal the menu press the REC Button
again.To stop recording, press the Stop Button.
You may also enter the Media Player Menu to
view your recorded programs via Movie mode.
9.4 Play the recording:
The program recorded on the "USB"will be saved
in the folder "usb record" on the device.
You can play it in PVR File System and in File
manager submenu.
Guide).
Buttons to highlight
Buttons to scroll
9.4.1
The USB storage size can be between 128MB
and 500GB in size, but for practical use 2GB to
500GB is recommended.
9.4.2
Video may become pixelated when Video bit
rate is too low. This can be caused by connecting a
USB extension cable instead of plugging the USB
directly into the TV.
Note: Ensure the storage device used to record is
inserted into the USB Input on the back of the unit and
is compatible for recording. If your storage device is
not compatible, you will be asked to format it. Enter
the PVR File System menu and select Device List to
format your device. During recording, only the Stop
functions is available.
There will be no record function,when the channel
is CI+ channel.
10. Time Shift
This TV allows you to pause and record the currently
watched digital program to a USB storage device, and
to resume to the point where it was paused.
10.1
While in the DTV input source, insertUSB storage
device to the USB port on the side of your TV.
10.2
Press the
button to pause the program
you are watching to activate Time Shift function.
The below menu will be displayed. This Menu will
auto disappear after several seconds.
10.3 Choose
the option and press OK to resume
playing, and a white play icon will appear at the right
of the screen, which shows that time shift is being
performed.
10.4 When the
menu disappeared, press the button,
the menu will appear again. To stoptime shifting,
press the Stop Button or move the cursor to select
the Stop option when the menu is on, and then
follow the pop-up guide.
Note :
Ensure the storage device used for recording is inserted
into the USB Input on the back of the unit and is compatible
for recording. If your storage device is not compatible, you
will be asked to format it. In Setup menu, enter the PVR File
System submenu and select Device List to format your device.
All the functions (Play, FB, FF, Pause and Stop) in the menu can
only be performed when the menu is on.
Ensure the storage device used to record is inserted into the
USB Input on the back of the unit and is compatible for recording.
If your storage device is not compatible,you will be asked to
format it. Enter the PVR File System menu and select Device
List to format your device. During recording, only the Stop
functions is available.
There will be no record function ,when the channel is CI+ channel.
Operation
EN-22
Advertisement
Table of Contents
