Advertisement
firewall. The recommended area for this is the shift cable boot to the left of the steering
column as shown in the following picture.
Once in the engine bay, locate the datalink connector. The location of the Datalink connector is
the same in all trucks from 2010 – Present. The Datalink shares the same harness as the fuel
injectors. It is located on the driver's side of the engine, behind the air intake horn, and is zip
tied to the harness with a weather proof plug protector plugged into the end of it. This
protector must be removed in order to plug the RSA unlock cable into. The location can be
seen in the picture below.
Advertisement
